EPS densifier solves EPS molds in the US construction industry

In recent years, the United States has paid more and more attention to infrastructure, but what you don’t know is that the construction industry will also produce a huge amount of EPS waste. At present, GREENMAX is cooperating with well-known companies in the U.S. construction industry to help the company recycle EPS waste, providing a Waste management scheme. The company has about 130 related businesses around the world. As the business grows bigger, the company scale also increases, and the waste EPS produced also increases. The company decided to adopt a more scientific and economical method for EPS recycling.

waste-EPS-model

During the course of the project, the company will produce a relatively large volume of waste EPS molds. The previous solution was to landfill the waste EPS molds. Because the volume of these EPS wastes is too large, it requires relatively expensive landfill costs, so Regardless of whether it is based on environmental protection policies or capital consumption, the company has decided to cooperate with GREENMAX to carry out waste recycling. Since the company’s EPS mold still needs to be carved in shape, a certain amount of EPS dust will be produced in this process. Based on the above situation, GREENMAX recommends an EPS densifier for the company to recycle. EPS densifier adopts hot-melt technology and can be recycled at the same time EPS blocs and EPS dust.

EPS-densifier-mars

The recycling principle of the GREENMAX EPS densifier is supported by hot-melt technology. This machine plays the role of compression by melting waste EPS. After melting EPS, most of the air in the waste can be removed, and dense waste can be obtained after extrusion and cooling. EPS ingots have a compression ratio of 90:1. At the same time, the most advantage of EPS densifiers is that they can accept dust. Putting blocs and dust into the EPS densifier at the same time can achieve good recovery.

The operation of the EPS densifier is very simple, the whole machine can be controlled through the touch screen, no professional skills are required, and anyone can easily learn to use this machine!

Leave a Comment