Eps is recyclable, can be reused and make into many products, such as picture frames, surfboard, and insulation board. More and more end-users are entering to this industry.
More and more companies are using eps compactor to recycle the EPS. How to use an eps compactor? It’s very easy!
- Open the switch
- Debug the up and down limitation to suitable number.
- Throw EPS scraps into the machine hopper. The crusher breaks the foam blocks into smaller flake of size 20mm to 50mm.
- After crushing, flakes will drop into the extruder cabin, the screw under the crusher presses the foam into compacted logs.
- You stack the logs onto pallets. The result is 7kg/m³ scrap densified up to 400kg/m³ blocks.
The eps compactor can compress EPS scrap foam packaging blocks, EPS fish boxes, and EPS foam board to absolute minimum, up to 50 to 1 size reduction. With this significant volume reduction, the compacted EPS will take up much less storage space, and it makes blocks easy to transport and handling. This means a big cost saving and higher residual value of scraps. Compare to the melt extrusion densifier, the cold compactor avoid thermal deterioration and deduction of the material viscosity, it is energy saving, and no any pollution to the air.

